When something goes wrong with the plumbing in a Crosby home, the first thing most people want is a straight answer about what is actually going on. Call us and that is what you get. We go over the situation on the phone, scope what the job likely involves, and give you a price before anything is scheduled. From there, you decide. We cover Crosby and the surrounding Harris County area, seven days a week from 7:00 AM to 9:30 PM.
Crosby is a town where a lot of the housing stock has some age to it, and older homes come with older pipes, original fixtures, and plumbing decisions made by previous owners that nobody documented. We handle the full range of residential plumbing work: drain cleaning, leak detection and repair, water heater repair and replacement, sewer line service, fixture installation, repiping, and emergency calls. Landlords and property managers with rental homes in the area call us too, and the process is the same either way. One call and the repair is scoped.
A drain that clears and then clogs again within a few weeks is telling you something. The blockage was moved, not removed. In a kitchen line, grease and food debris accumulate along the pipe walls and keep catching material even after a snake passes through. In a main sewer line, root intrusion from mature trees is a common cause in this region, and roots that have found their way into a joint do not stop growing once they are trimmed. We use a camera to confirm what is actually in the line before recommending a method, and hydro jetting is often the right call when buildup or roots are the cause. It clears the full interior of the pipe rather than just punching a hole through the obstruction.
A water heater that stops producing hot water entirely and one that produces it unreliably are usually two different problems. A complete loss often points to a failed heating element, a tripped high-limit switch, or a unit that has reached the end of its life. Inconsistent hot water, where the temperature fluctuates or runs out faster than it used to, more often points to sediment buildup reducing the effective capacity of the tank, or a thermostat that is no longer reading accurately. We diagnose what the unit is doing before recommending repair or replacement, and we quote both options when replacement is a reasonable consideration so you can make an informed decision.
A shower that will not hold temperature, runs cold when another fixture is used, or has a handle that no longer controls the flow properly is usually a valve problem. Cartridge-style valves wear out over time, and in areas with harder water the mineral buildup accelerates that wear. We replace the cartridge or the valve body depending on what the inspection shows. A shower that has been dripping at the head or through the handle is also worth addressing before the water loss adds up.
Fixture replacement comes up regularly in older homes, whether it is a bathroom vanity being updated, a kitchen sink being swapped out during a renovation, or a utility sink being added to a laundry room. We handle the supply connections, the drain rough-in, and the fixture itself. Garbage disposal installation falls into this category too, and we connect new units or replace ones that have stopped running or developed a leak at the base. If the supply shutoff valves under the sink are original to the house and have not been turned in years, we address those at the same time rather than leaving a valve in place that will not close when it needs to.
Older homes in this area often hide older pipes behind newer walls. Galvanized steel pipe corrodes from the inside out, and the rust buildup narrows the interior diameter over time, reducing pressure and eventually causing pinhole leaks. Polybutylene pipe, common in homes built between the 1970s and the mid-1990s, becomes brittle and develops cracks at fittings and joints. When either material starts failing, patching individual sections is a short-term answer. A whole-home repipe replaces the supply lines with copper or PEX throughout, and the price is confirmed before any walls come open.
When we arrive at a Crosby property, the first step is understanding the situation. We look at what the customer has described and trace it back to the source. A slow drain gets inspected to confirm whether the problem is at the fixture trap, in the branch line, or further down in the main. A leak gets pressure-tested to locate the source before anything is opened up. Slab leak detection uses electronic methods to trace a pressurized line beneath concrete without tearing up the floor to find it.
Nothing is agreed to until the scope is clear. We explain what we found, what the repair involves, and what it will cost before any work begins. If the job turns out to be more involved than the initial description suggested, we go over the updated scope with you before proceeding. You are not committed to work you have not agreed to.
The price for a plumbing job is not a fixed number we arrive with. It depends on what the fault turns out to be, what has to come apart to reach it, what materials the repair calls for, and how accessible the affected pipe or fixture is. A faucet replacement in a standard bathroom cabinet is a different job from the same replacement in a tight utility space with original shutoff valves that have not moved in twenty years.
When you call, we scope the job on the phone as far as the description allows. For straightforward jobs, that is often enough to give you a number. For anything that needs eyes on it first, the price is confirmed at the property before work starts. No-pressure estimates, priced up front. What we quote covers the scope we agreed to, and if the scope changes, you hear about it before the work does.
Call us at (936) 236-9497 any day from 7:00 AM to 9:30 PM.
When you call, have a description of what you are seeing ready: which fixture is affected, how long it has been going on, whether it is getting worse, and whether other fixtures in the house are behaving differently. That information lets us scope the job accurately on the phone and give you a useful number rather than a wide range.
For jobs that need a site visit to price, we confirm what the visit will cover before we schedule it. The job is scoped and priced before a wrench comes out, so you know what the work involves before you commit to it.
We are available every day from 7:00 AM to 9:30 PM, including weekends and evenings. When you call, we go over what is open on the schedule and find a slot that works for the property. Landlords and property managers who need to coordinate access with a tenant can tell us that on the call and we will work around it. Give us a call and we will take it from there.
A burst pipe, a sewer backup that has taken fixtures out of service, or a complete loss of hot water are situations that need a fast response. We take urgent calls on the same availability, seven days a week. When you call with an emergency, the first step is always the same: shut off the water at the nearest valve, or at the main if the leak is widespread, to stop the damage from spreading while we get the repair moving. Short-notice work is something we take on, and the schedule is confirmed when you call. Anything not covered here is on our page listing every plumbing service.
A single slow drain, a toilet that will not flush cleanly, or a faucet with low pressure at the aerator is almost always a fixture-level problem. The branch line serving that fixture, the trap, the aerator screen, or the fixture valve itself is where to look. Those jobs are contained and usually straightforward to diagnose.
When multiple fixtures are backing up at the same time, or when drains throughout the house are slow regardless of which room they are in, the problem is in the main line. A main line backup affects everything downstream of it, and clearing a single fixture does not address it. The same logic applies to water pressure: low pressure at one faucet points to a clogged aerator or a partly closed supply valve. Low pressure throughout the whole house points to the pressure regulator, the main shutoff, or a hidden leak bleeding pressure from the system.
Knowing which situation you are in changes what the repair involves and what it costs. That is why the diagnosis comes before the quote.
We cover Crosby and the communities around it in Harris County. That includes Barrett, Sheldon, Highlands, Channelview, and Atascocita. If you are in any of those towns or in the surrounding area, call us to confirm coverage at your address.
The housing in this part of Harris County includes a mix of older homes, rural properties, and newer construction, and the plumbing work reflects that range. Sewer line service, water heater replacement, leak detection, and drain cleaning are the most common calls across the area. Shutoff valve replacement comes up often on properties where the original valves have never been serviced. We handle all of it on the same availability, for the same types of properties, across the whole area we serve.
Not always. When a section of pipe is repaired or replaced, the new material is chosen based on what is compatible with the existing system and appropriate for the application, not necessarily what was originally installed. We explain the material choice when the repair is scoped so you understand what is going in and why.
A leak that is actively wetting the structure, one that cannot be contained by turning off a shutoff valve, or one that is affecting a fixture the household depends on for daily use are all situations worth calling about urgently. We take short-notice calls and can often fit urgent work into the current schedule.
Call us at (936) 236-9497 and describe what is happening so we can assess the urgency together.
Older homes in this part of Harris County often have original supply lines, cast iron drain stacks, and shutoff valves that have not been operated in years. When we scope a job in a house like that, we account for what we are likely to find behind the walls and under the slab, so the price reflects the actual work rather than an optimistic estimate based on what is visible from the surface.
This part of Harris County has mature tree canopy in many neighborhoods, and tree roots follow moisture into sewer line joints, particularly in older clay and cast iron lines. If a main line backup keeps coming back, root intrusion is one of the first things we check for with a camera inspection. Clearing the roots addresses the immediate blockage, but if the pipe itself has been damaged, we go over repair or replacement options before the problem repeats.
A slow drain that has been slow for six months, a water heater that takes longer than it used to, a pipe that drips only occasionally, a toilet that runs for a few minutes after every flush. These are the calls that get put off because nothing has failed completely yet. The problem is that each of them is moving in one direction. Solid workmanship. Clear pricing. Straight answers.
Call (936) 236-9497 and we will scope the job on the phone, give you a price, and get it on the schedule.
The problem does not get easier to fix the longer it sits.
Plumbing service reaches these neighboring areas too: Highlands, Channelview, Atascocita, Dayton. View our full list of areas.
Every job we take on in Crosby starts the same way: we scope the work and set the price before anything begins, so you know exactly what you are getting into. The table below lays out the plumbing services we handle for homeowners, landlords, and commercial customers across Harris County. Find the service that fits your situation, then call us and we will walk through what the job involves and what it will cost.
| Service | Scope of Work | When to Call | Worth Knowing |
|---|---|---|---|
| Sump Pump Installation | New pump and pit installationDischarge line connectionFloat switch setup and testingRepair or replacement of existing units | Low-lying properties or crawl spaces prone to water intrusion after heavy rain | Harris County's high annual rainfall makes sump pump reliability a real concern. We confirm backup power options at installation. |
| Water Heater Repair & ReplacementMost Popular | Tank and tankless unitsRepair diagnosis before replacement is recommendedNew installation and connectionFuel type and size matched to the home | No hot water, inconsistent temperature, or a unit that is leaking or overdue | We tell you whether repair or replacement makes more sense before any work starts, and price it out either way. |
| Whole-Home Repiping | Galvanized and polybutylene pipe replacementModern material installation throughoutFixture reconnection after repipePressure test on completion | Homes with aging pipe material, recurring leaks, or discolored water from the supply | Older homes in the Crosby area often have galvanized pipe behind finished walls. A full repipe addresses the whole system rather than patching one section at a time. |
Call us at (936) 236-9497 and we will scope your situation on the phone, give you a price, and get the job on the schedule.
(936) 236-9497